The
SAEC WE-308 is designed to offer the new reference standard of tone arm
engineering for the serious audiophile. The Audio Engineering's remarkable
approach toward the perfection of disc sound is crystallized in the WE-308's
unique construction, the Double Knife Edge.
The
Double Knife Edge had two blades in the past. Currently, it was made to include
four blades up and down providing a structure in which the edge support is held
firmly from both sides and from the top. Since these four blades are ground to
form a straight line, they practically constitute a high strength pivoting body
with the straight line as turning axis and with no mechanical free play.
SAEC
knife edge blade has a diameter of less than 0,02mm and is ultra-precise. This
finish precision sets SAEC apart from other makers. The edge is first ground to
0,05mm by a machine and then to 0,02mm by a skilled human hand.
This
newer construction covers up disadvantages of conventional knife edge type tone
arms.
The
Double Knife Edge provides the lowest friction level and highest sensitive
movement of the tone arm ever achieved.
Therefore,
the WE-308 with any advanced cartridge tracks the record groove with less
distortion than ever and reproduces clear directionality, pinpoint placement of
instruments and phenomenal cleanness of the disc sound.
The
SAEC WE-308 itself is a precision-balanced arm. The three-axis of the arm is
meticulously balanced so it practically results in no loss of
sensitivity.
Fine
adjustments of the tracking force are automatically carried out as the arm
tracks to the inner grooves of a record. This special device, along with the
light weight and lowest resonance "ultimate" headshell, provides more faithful
reproduction of sound. On the most inner groove, for example, it oes a
remarkable job with 20% more tracking force that results in clear and
open high frequency response information.
Specifications:
Effective length: 240,0mm
Overhang: 5,0mm
Offset angle: 12,5
Effective mass: >12,0g
Cartridge weight range: 5,0g – 11,0g
Height range: 45,5mm – 62,5mm
Mounting hole: 27,0mm
For more info take a look here.