IKEDA SOUND LABS IT 407 tonearm

Designed and built by the old Isamu Ikeda. Way back in 1967, Ikeda-san founded Fidelity Research, a celebrated Japanese firm that left its mark on the analog world with its tonearms (FR series), cartridges (FR-1 and MC-202) and step up. By 1986 he had founded Ikeda Sound Labs, specializing in low-compliance moving-coil cartridges and high-mass, transcription-length tonearms.

The Ikeda 407 is GREAT with the high mass, low compliance cartridges, like Ortofon SPU and the EMT TSD15SFL; with this combination you can obtain a magical sound, emotionally involving and very tactile. A FUN way to listen to music with a GREAT performer.

Specifications

Ikeda IT-407CR1 (Long Arm)

Type: Dynamic balance

Overall length: 388mm

Effective length: 307mm

Overhang: 12mm

Tracking error: +2°～　- 0°35'

Stylus force range: 0g ～ 5g (in 0.5g step)

Mounting hole diameter: 31mm

Arm height adjustment range: 25mm - 60mm

Max. arm board thickness: 35mm

Cartridge/Headshell balance range: 6g - 38.5g

Headshell weight: 17.2g

 

 

Mono in Mono: PIERRE CLEMENT L7B Mono Cartridge

As most audiophiles know TRUE MONO cartridges are built only to pick up signals of the record in the horizontal plane.

Mono pressings sound more lively, have depth perception and less noise.

Is also faschinating to experience the excellence of mono recordings in the manner that they were meant to be heard and enjoyed at that time.

Among the many mono cartridges which I have had, this Pierre Clement is one of my favourites.

Pimp up your Thorens TD124

Some pics of the amagnetic platter for my beloved 124!

SAEC WE-308N (1978, JPY 38,000) Static Tonearm

The SAEC WE-308 is designed to offer the new reference standard of tone arm engineering for the serious audiophile. The Audio Engineering's remarkable approach toward the perfection of disc sound is crystallized in the WE-308's unique construction, the Double Knife Edge.
The Double Knife Edge had two blades in the past. Currently, it was made to include four blades up and down providing a structure in which the edge support is held firmly from both sides and from the top. Since these four blades are ground to form a straight line, they practically constitute a high strength pivoting body with the straight line as turning axis and with no mechanical free play. 
SAEC knife edge blade has a diameter of less than 0,02mm and is ultra-precise. This finish precision sets SAEC apart from other makers. The edge is first ground to 0,05mm by a machine and then to 0,02mm by a skilled human hand.
This newer construction covers up disadvantages of conventional knife edge type tone arms.
The Double Knife Edge provides the lowest friction level and highest sensitive movement of the tone arm ever achieved.
Therefore, the WE-308 with any advanced cartridge tracks the record groove with less distortion than ever and reproduces clear directionality, pinpoint placement of instruments and phenomenal cleanness of the disc sound.
The SAEC WE-308 itself is a precision-balanced arm. The three-axis of the arm is meticulously balanced so it practically results in no loss of sensitivity.
Fine adjustments of the tracking force are automatically carried out as the arm tracks to the inner grooves of a record. This special device, along with the light weight and lowest resonance "ultimate" headshell, provides more faithful reproduction of sound. On the most inner groove, for example, it oes a remarkable job with 20% more tracking force that results in clear and open high frequency response information.

Specifications: 

Effective length: 240,0mm

Overhang: 5,0mm

Offset angle: 12,5

Effective mass: >12,0g

Cartridge weight range: 5,0g – 11,0g

Height range: 45,5mm – 62,5mm

Mounting hole: 27,0mm

For more info take a look here.